TS-301 is made up of selected polymer emulsion and auxiliaries. It can be used as wall putty scraping, water proofing coating and ceramic tile paving interface to enhance the cohesive force of putty, waterproofing slurry and low water absorption ceramic tiles. It can also be used as an additive for mortar plastering to improve the flexibility, water resistance and cohesive force of mortar.
Packaging Label: Easy to Paint, Economical, Strong Viscosity, Multifunctional
Product performance
Excellent construction performance, higher viscosity, easy to brush, healthy and environmental protection;
Moisture-proof, water-proof and durable performance;
It has a wide range of applications, such as enclosure, reinforcement, napping and reinforcement. A bucket can meet all kinds of needs.
Application range
It is suitable for the interface treatment of cement mortar, concrete, light block and other substrates.
As the interface treatment agent before cement plastering and repairing mortar, it can reduce the water absorption of the base surface and increase the bonding force between the base surface and the plastering layer.
Combining with mortar plastering layers of different thicknesses can increase the flexibility, water resistance and bonding strength of the products.
Usage method
Open the bucket, directly brush the base, wall or tile back for reinforcement. It can also be used as additive of cement mortar plastering layer according to the ratio of interface agent:cement = 1:2, electric stirring and mixing.
Transportation& Storage
This product is non-flammable and explosive material. It can be transported according to general cargo. It should be sunscreen, freeze-proof, rain-proof, extrusion and collision-proof in transportation, and keep the package intact.
The product should be sealed in a ventilated, dry and cool place. The storage temperature is +5℃~+35℃.
Under normal storage and transportation conditions, the storage period is12 months from the date of production.
Attention
If the product touches the skin wash it with clean water. If enter eyes carelessly, wash it with clean water immediately and see a doctor in time.
Performance parameter
Reference Dosage: 0.5-2kg/㎡
Initial setting time: ≤45min
Final setting time: ≤24hours
Construction temperature: +5℃~+35℃
Packaging: 5kgs/bucket 18kgs/bucket
Implementation standard: JC/T 907-2002, specific indicators see technical parameters.
Project | Index | |||
Type I | Type II | |||
Shear bond strength/Mpa | 7d | ≥1.0 | ≥0.7 | |
14d | ≥1.5 | ≥1.0 | ||
Tensile bond strength/Mpa | Untreated | 7d | ≥0.4 | ≥0.3 |
14d | ≥0.6 | ≥0.5 | ||
Soaking treatment | ≥0.5 | ≥0.3 | ||
Heat treatment | ||||
Freeze-thaw Cycle Treatment | ||||
Alkali treatment | ||||
Airing time/20min | -- | ≥10 | ||
The airing time of type I is determined by both suppliers and buyers according to the engineering requirements. | ||||
24 hours Hotline