TS-401 is a special waterproof and leak-stopping material with waterproof, fast leak-stopping, bonding and micro-expansion, which is made of special cement and various additives.
Product characteristics
Fast solidification, instantaneous water stop, high strength, micro expansion, strong bonding, high impermeability;
It combines with the matrix to form a whole and is not easy to aging.
The utility model is simple to use and can be used on the water front or back surface to achieve the effect of leak plugging and waterproofing.
Application range
Seepage plugging of basement, toilet, pool, tunnel culvert, reservoir dam and roof. Emergency repair of various pressure pipes, emergency installation of mechanical equipment to plug leakage.
Usage method:
1. Leak-stopping material:water = 1:0.25 is kneaded together to form a ball. In order to ensure the quick setting property of the material, when the ambient temperature is below 10℃, it is regulated by warm water.
2. Moisture Maintenance: Moisture Maintenance to prevent powdering immediately after hardening of the coating. Maintenance methods are spraying water, covering wet cloth, etc. The first maintenance should be careful not to damage the coating, a total of 2 to 3 days, wet place can be maintained naturally.
Performance parameter
Reference Dosage: According to the actual site dosage
Initial setting time: ≤5 minutes
Final setting time: ≤10 minutes
Construction temperature: +5℃~+35℃
Packaging: 1kg/package, 5kgs/package
Implementation standard: GB 23440-2009, specific indicators see technical parameters.
No | Project | Performance index comparison | ||
Retarding type(I) | Quick setting type(II) | |||
1 | setting time | Initial setting /min | ≥10 | ≥5 |
Final setting /min | ≤360 | ≤10 | ||
2 | Compressive strength/Mpa | 1h | - | ≥4.5 |
3rd | ≥13.0 | ≥15.0 | ||
3 | Flexural strength/Mpa | 1h | - | ≥1.5 |
3rd | ≥3.0 | ≥4.0 | ||
4 | Impermeability Pressure of Coating/Mpa(7d) | ≥4.0 | - | |
5 | Impermeability pressure of specimens/Mpa(7d) | ≥1.5 | ||
6 | Bond strength/Mpa(7d) | ≥0.6 | ||
7 | Heat resistance(100℃,5h) | No cracking, peeling, shedding | ||
8 | Freeze-thaw cycle(20times) | No cracking, peeling, shedding | ||
Transportation& Storage
Unopened products are stored in dry, cool and ventilated places.
Under normal storage and transportation conditions, the storage period is 12 months from the date of production.
Attention
This product is easy to absorb water and moisture. It needs to be used up once after opening.
This product should be constructed in the environment of 5 - 35℃.
This product will give off a lot of heat when it is cured, so attention should be paid to preventing scald.
This product will be irritating if it splashes into the eyes. Please rinse it with clean water in time.
24 hours Hotline